01Powder coating
Charged powder applied evenly and oven-cured into a hard, seamless film for steel, aluminium and most metal parts.
Get a quote →
MelbournePowder coating for homes, trades & industry
Powder Coating Melbourne
Durable powder coating for gates, fencing, outdoor furniture, wheels and fabricated steel. Every piece is stripped and properly prepared, so the finish bonds and lasts.
Send a photo with rough dimensions and your colour, and we'll recommend the right preparation and finish.
Metal
Coating ideas
Any RAL
Plus custom colour match
1 – 1,000
One-offs to batch runs
Popular colours
Quote from a photoFree, no obligation
Fixed quote before we start
Full surface preparation
Any RAL colour or custom match
Residential, trade & commercial
Why it lasts
Powder Coating in Melbourne
We start with the metal and where it will live. A gate by the bay needs a different system to an indoor shelf, and the right preparation is what makes a finish last.
Upfront, fixed quotes
You know the price before any work begins.
Proper preparation
Old coatings, rust and contaminants removed first.
Exact colour
RAL charts, or bring a sample to match.
Every finish
Gloss, satin, matt, metallic and textured.
Any quantity
A single chair or an ongoing trade run.
Checked before pickup
Every piece inspected for coverage and finish.
A coastal balustrade may need a primer under the topcoat, while an indoor bracket does not. We explain the options before you approve the quote.
Services
Powder Coating Services in Melbourne
From single pieces to full trade runs. Tell us what the part is and where it will be used, and we'll match the preparation and finish to the job.
01
02Sandblasting & surface prep
Rust, mill scale and old paint blasted back to clean metal with the right profile for the coating to grip.
Get a quote →
03Strip & recoat
Chipped, faded or peeling? The old coating comes off completely and the piece is refinished to an as-new standard.
Get a quote →
04Gates, fencing & balustrades
Outdoor steel and aluminium coated for sun, rain and salt air, with primer systems for exposed sites.
Get a quote →
05Wheels & automotive
Rims, frames, brackets and engine bay parts finished to resist heat, stone chips and brake dust.
Get a quote →
06Trade & batch coating
Scheduled runs for fabricators, builders and manufacturers, coated to spec with consistent colour.
Open a trade account →Preparation
Surface Preparation & Primer Systems
The coating you see is only part of the job. What sits underneath decides how long it lasts, so we explain the preparation and any primer before work begins.
Cleaning & pretreatment
Oils, residue and contamination are removed so the powder bonds to bare, sound metal.
Two-coat primer systems
For steel near the coast or in harsh conditions, a primer under the topcoat adds a second layer of corrosion protection.
Colours & finishes
Colour, Finish & Colour Matching
Pick from standard RAL charts, choose your sheen, or bring in a sample and we'll match it. Ask to see a physical sample before you sign off.
Colour matching
Bring a sample, a code or a photo.
RAL & custom colours
Architectural neutrals to bold statement colours.
Metallic & textured
Gloss, satin & matt
Clear coats for raw metal
Same colour across repeat orders
Physical samples on request
Common jobs
What Melbourne Customers Bring In
If it's metal and it can handle the oven, we can usually coat it. These are the jobs we see most often.
Send us a photo →- ✓Gates & fencing — new fabrication or rusted panels brought back to life.
- ✓Balustrades & handrails — indoor and outdoor, including coastal homes.
- ✓Outdoor furniture — tables, chairs and frames that have faded or flaked.
- ✓Wheels & rims — car, 4WD and motorcycle wheels in any colour.
- ✓Car & bike parts — frames, brackets, bars and engine bay parts.
- ✓Steel fabrication — beams, brackets and structural parts for builders.
- ✓Architectural aluminium — screens, louvres and shopfitting components.
- ✓Signage & fit-outs — frames, posts and display hardware.
Industries
Industries We Work With
Homeowners, builders, fabricators, architects, automotive workshops and manufacturers across Melbourne. Each needs something different in finish, durability and timing.
ResidentialBuildersFabricatorsArchitectsAutomotiveManufacturing
Tell us what the part is, how many there are and where it will be installed. That helps us recommend the right preparation and coating system.
Why choose us
An Assessment Before Every Finish
01
Tell us about the part
What it is, its size, condition and where it will live. Photos help.
02
Understand the cost
Price depends on size, preparation and colour. We itemise it before you approve.
03
The right system
Single coat or primer plus topcoat, chosen for the metal and the setting.
04
Know the limits
Parts with rubber seals or heavy pitting need extra work. We tell you up front.
05
Real feedback
Read what customers say about the finish and the service below.
How it works
How We Powder Coat Your Parts
- 01
Send details
Photos, sizes, quantity and colour by form or phone.
- 02
Fixed quote
We confirm the price and timing before any work.
- 03
Drop-off
Discuss drop-off or collection options when requesting a quote.
- 04
Strip & prepare
Old coatings and rust removed; surface blasted and cleaned.
- 05
Coat & cure
Powder applied, then oven-cured into a hard finish.
- 06
Inspect & collect
Checked, wrapped and ready for pickup.
Service Area
Explore powder coating options for items across Melbourne. Send an enquiry to discuss your project.
Enquiries
Contact us to discuss your project and availability.
How long does powder coating last?
It depends on the preparation, the powder used and where the item lives. A properly prepared and cured coating will typically outlast wet paint by a wide margin, especially outdoors.
What can be powder coated?
Most metals that can handle the oven cure, including steel, aluminium and many cast parts. Plastic, wood and parts with rubber seals generally cannot go in the oven as they are.
Do you remove the old paint first?
Yes. Old coatings, rust and contaminants are stripped or blasted off so the new powder bonds to clean metal.
Can you match a specific colour?
Give us a RAL code, or bring in a sample and we will match it. We recommend seeing a physical sample before signing off on a custom colour.
How long does a job take?
It depends on preparation, quantity and whether the colour is in stock. We confirm timing when we quote.
Is powder coating better than painting?
Powder coating produces a thicker, harder film with no runs or drips, contains no solvents, and is fully cured once it cools. For metal that gets handled or lives outside, it is usually the more durable choice.
Can you coat galvanised steel?
Often, yes, with the right preparation. Galvanised steel needs specific treatment for good adhesion, so mention it when you request a quote.
How do I get a quote?
Send the form below with photos, rough dimensions, quantity and colour to enquire about a quote.
Get a quote
Request a Powder Coating Quote
Send the form with a photo of your part to enquire about a quote. Submitting the form does not confirm a booking.
Free, no-obligation quotes
Project enquiries welcome
Residential, trade & commercial
Contact us